|
Statement
D2v
The Statement D2 Audio/Video
Processor
D2v WITH ANTHEM ROOM CORRECTION (ARC)
The D2v pushes the boundaries on what you can expect from music and home theater performance. With the unparalleled flexibility you have come to expect from Anthem processors, it provides both the versatility and adjustability you need to make all of your digital video components work together seamlessly. The results are spectacular.
Leading-edge video format conversion and next-generation processing unleash the full potential of your high-definition display. The improvement the D2v’s video processing brings to picture quality and picture clarity is astounding. While on lower resolution displays the improvements are dramatic, on the new generation of displays, picture quality is simply astonishing!
The D2v also boasts our built-in precision upsampler which converts sample rates of all incoming digital signals to 192 kHz. In fact, the D2v is still the only preamplifier/processor to offer upsampling on all channels and all formats, including decoded Dolby Digital and DTS material.
As a high-end whole-home entertainment center, the D2v is as much about distributed video as it is about distributed audio—allowing you to select and direct audio and video program material throughout your home.
And then there’s Anthem Room Correction (ARC), included with every D2v. Even when the finest speakers are perfectly positioned, the room itself still has a dramatic impact on a system’s sound, an impact more profound than that of any individual component. Various solutions have fallen in and out of favor over the years, but none has solved the problem of “the room.” Until ARC. Using proprietary processes and the power of your PC, ARC analyzes each speaker’s in-room sound and then computes the required correction to yield optimal performance from every speaker.
Designed and manufactured in North America, the D2v is the ultimate high-end statement—the final word in digital audio and digital video processing as well as problems of “the room.”
| D2v TECHNICAL SPECIFICATIONS |
| VIDEO SWITCHING |
| Bandwidth from input to output jack (bypass mode for component video) |
| Composite and S-Video |
70 MHz |
| Component: |
Y |
110 MHz |
|
Pr |
90 MHz |
|
Pb |
80 MHz |
| All analog video inputs and outputs are 75 Ω, 1.5 Vp-p. |
|
| ANALOG AUDIO |
| Input Impedance |
20 kΩ |
| Output Impedance |
|
|
Main-RCA |
300 Ω |
|
XLR |
600 Ω |
|
Zones 2/3 and Record |
51 Ω |
|
|
|
| DIGITAL AUDIO |
| Crossover |
|
|
|
High-Pass Slope (small speaker setting) |
12 dB/octave (2nd order) |
|
Low-Pass Slope (subwoofer) |
24 dB/octave (4th order) |
|
Frequency (adjustable) |
25 Hz to 160 Hz (in 5 Hz increments) |
| Tone Control |
|
|
|
Fliter Type |
Shelf |
|
Range |
+/- 12 dB |
|
Bass Turnover Frequency |
200 Hz |
|
Treble Turnover Frequency |
2 kHz |
| Analog-to-Digital Conversion S/N Ratio(at digital Rec output) (IEC-A Filter) |
100 dB |
| All digital audio inputs and outputs comply with HDMI, S/PDIF or AES/EBU standards. Sample rate converter output is 24 bit/192 kHz regardless of input. |
| |
|
| MAIN PATH (RCA and XLR Outputs) |
| Frequency Response and Bandwidth |
|
| |
Analog Direct Inputs |
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB) |
| |
Analog-DSP Inputs at 24/96 |
10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB) |
| |
Digital Inputs at 24/96 |
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB) |
| THD+N (at Rated Input and Output) |
|
|
Analog Direct Inputs |
0.006% (80 kHz BW) |
|
Analog-DSP Inputs at 24/48 or 24/96 |
0.004% (AES17 Filter) |
|
Digital Inputs at 24/48 or 24/96 |
0.004% (AES17 Filter) |
| IMD (CCIF at 15 kHz and 16 kHz) |
|
|
Analog Direct Inputs |
<0.001% |
|
Analog-DSP Inputs at 24/48 |
0.001% |
|
Digital Inputs at 24/48 or 24/96 |
0.001% |
| S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) |
|
|
Analog Direct Inputs |
107 dB |
|
Analog-DSP Inputs at 24/48 or 24/96 |
101 dB |
|
Digital Inputs at 24/48 or 24/96 |
104 dB |
| ZONE 2 and ZONE 3 PATHS |
| Frequency Response and Bandwidth |
|
20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB) |
| THD+N (at Rated Input and Output) |
|
0.06% (80 kHz BW) |
| IMD (CCIF at 15 kHz and 16 kHz) |
|
0.06% |
| S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) |
|
97 dB |
| FM TUNER |
|
|
| Sensitivity |
|
|
|
50 dB S/N |
13 dBµ typical, 25 dBµ max. |
|
IHF |
10 dBµ typical, 20 dBµ max |
| S/N Ratio |
|
|
|
Mono |
75 dB typical, 65 dB min |
|
Stereo |
69 dB typical, 60 dB min |
| Distortion |
|
|
|
Mono |
0.2% typical, 1.0% max |
|
Stereo |
0.3% typical, 1.5% max |
| Stereo Separation |
40 dB typical, 25 dB min |
| Alternate Channel Selectivity (+/- 400 kHz) |
70 dB typical, 60 dB min |
| Frequency Response |
25 Hz to 15 kHz (+0 -2 dB) |
|
|
| AM TUNER |
|
| Sensitivity (20 dB S/N) |
49 dBµ typical, 56 dBµ max. |
| S/N Ratio |
50 dB typical, 43 dB min. |
| Distortion |
0.7% typical, 2.0% max. |
| One-Signal Selectivity (+/- 10 kHz) |
24 dB typical, 18 dB min. |
|
|
| CONTROL |
|
| Infra Red |
|
|
|
Carrier Frequency |
38 kHz |
|
Maximum 12 V Supply Current |
150 mA |
|
Maximum Emitter Current |
60 mA per output |
| RS-232 Interface |
|
|
|
Connection |
DB-9F, straight-wired |
|
Pinout (D2v side) |
Pin 2: Tx, Pin 3: Rx, Pin 5: Ground |
|
Baud Rate |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
|
Configuration |
8 data bits, 1 stop bit, no parity bits, flow control
(RTS/CTS, none) |
| Trigger Outputs |
|
|
|
Polarity |
tip positive, sleeve ground |
|
Maximum Current at 12 VDC |
300 mA between all three triggers |
|
Sequential Delay |
250 ms |
|
|
|
| POWER REQUIREMENT |
| Consumption |
|
Maximum 170 W |
|
|
|
| DIMENSIONS |
|
|
| Height |
|
5-7/8 inches (14.9 cm) including feet;
rack-mounting: 3 rack units without feet |
| Width |
Standard version |
19-1/4 inches (49 cm) |
|
Rack-Mount version |
19 inches (48.3 cm) |
|
No-Handle version |
17-1/4 inches (43.8 cm) |
| Depth |
|
15-1/4 inches (38.7 cm) |
| Weight (unpacked) |
|
27 lb (12.3 kg) |
| AVAILABLE FINISH |
|
Black |
|
|
