| |
Although
servo control is not new, the Servo-15’s state-of-the-art design
moves beyond the traditional use of servo to merely reduce distortion.
It is one thing to have a servo system, it is quite another to have
a servo system that plays loud! This requires far greater design
sophistication.
The Servo-15 is accurate to an astonishing 12 Hz! In a typical listening room
it can reproduce a visceral 120 dB without audible distortion. More important,
however, is the absolute accuracy of the deep bass. The Servo-15 must be heard
to be believed! Its ability to retrieve fine bass detail and follow bass lines
so precisely is simply extraordinary. The Servo-15 not only plumbs the depths,
but does so with a shocking sense of realism!
Click
here to read Reviews of the Servo-15 Subwoofer
Servo-15 Subwoofer |
Servo-15 |
|
|
| Type |
Subwoofer |
| Design |
Single
high-excursion driver; Closed-Loop Servo system; sealed enclosure;
built-in Ultra-Class-D™ amplifier |
| Amplifier |
1200
watts RMS (20–150
Hz @ <0.1% THD),
4500 watts Peak |
| Amplifier Features |
Auto-On/Off;
Trigger-On/Off; soft clipping; thermal protection; electrical
shorting protection |
| Bass Driver |
380-mm
(15")
RCR™ mineral-filled co-polymer polypropylene cone; oversize
surround; 76-mm (3") bifilar 8-layer voice coil; high-temperature
Apical™ former; dual spiders; AVS™ die-cast heatsink
chassis; 29-lb (13kg) magnet structure |
| Low Frequency Extension |
12 Hz (DIN) |
| Subwoofer Cut-Off Frequency |
Variable
35 Hz – 150 Hz |
| Subwoofer Contour |
Variable 0 to +6 dB at 60 Hz |
| Sub./Sat. Phase Alignment |
Variable
0º – 180º |
| Line Level Input |
RCA (S/E)
or Balanced-XLR. From Sub-Out/LFE-Out of preamp/processor or
other line level source |
| Line Level Input Sensitivity |
100 mV mono |
| Line Level Input Impedance |
RCA: 25k ohms; XLR: 20k ohms |
| Internal Volume |
84.5 L / 2.98
cu ft |
| Height, Width, Depth |
51 x 46 x
55cm
20-1/8 x 18-1/8 x 21-1/2in |
| Weight |
51.7kg / 114
lb each |
| Finishes |
Sycamore, Cherry, Rosenut, Black
Ash |
|
|
)
Download
Print Version
