 |
 |
 |
 |
 |
 |
 |
| |
| NEW!
Built-In Image Processing – Now Available in the AVM 50 |
Why
a Built-In Image Processor?
At Anthem, we believe that image processing (video scaling) is
far more effective and efficient when executed inside the digital
audio/video processor, as opposed to through an external image
processor:
|
• |
Image processing inside the SSP enables
processing of as many sources as the preamplifier can accommodate. |
|
• |
Convenience! With video signals processed
in the SSP, audio and video do not have to be switched
separately as the user switches from source to source. |
|
• |
Video
processing can be “tweaked” separately
and accordingly for each source. |
|
• |
With
video and audio processing together in one unit, HDMI™ switching
time is minimized. |
|
• |
External
processors cannot accommodate playing DVD-A through HDMI™. |
|
• |
Anthem™ software
upgrades can be incorporated over time to enhance connectivity. |
|
| PREAMPLIFIER
SECTION |
| Input
Impedance |
20
k ohms |
Output
Impedance
Main-RCA
Other-RCA
XLR |
300
ohms
51 ohms
600 ohms |
| Rated
Input |
2.0
Vrms |
Maximum
Input
6-Channel S/E
All Others |
3.0
Vrms
5.3 Vrms |
| Rated
Output (100k ohms load) |
2.0
Vrms |
| Minimum
Load |
5k
ohms |
Maximum
Output
RCA
XLR |
6.3
Vrms
12.6 Vrms |
| Headphone
Output |
100
mW into 32 ohms @ 0.2% THD+N |
Volume
Range
Main
Zone 2/3 & Headphone |
-95.5
dB to +31.5 dB (0.5 dB resolution)
-62.5 dB to +10.0 dB (1.25 dB resolution) |
Bass
Management
High-Pass Slope (Small Speaker Setting)
Low-Pass Slope (Subwoofer)
Crossover Frequency (Adjustable in 5 Hz Increments) |
12
dB/octave (2nd order)
24 dB/octave (4th order)
25-160 Hz |
Tone
Control
Bass Turnover Frequency
Treble Turnover Frequency
Range
Filter Response Type |
200
Hz
2 kHz
+/- 12 dB
Shelf |
| Channel
Separation (at 1 kHz) |
82
dB |
| Crosstalk
Between Inputs (at 1 kHz) |
86
dB |
|
|
| |
MAIN
PATH
(RCA & XLR Outputs, 48 kHz Sampling Rate for all Digital
Signal Paths) |
Frequency
Response and Bandwidth
6-Ch S/E and 2-Ch BAL Direct Inputs
2-Ch S/E Direct Inputs
Analog-DSP Inputs @ 24/96
Digital Inputs @ 24/96 |
10
Hz to 20 kHz +0, -0.2 dB; 1 Hz to 130 kHz -3 dB
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 120 kHz -3 dB
10 Hz to 20 kHz +0, -0.3 dB; 1 Hz to 37 kHz -3 dB
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 39 kHz -3 dB
|
THD+N
(at Rated Input & Output)
6-Ch S/E Direct Input
2-Ch BAL Direct Input
2-Ch S/E Direct Inputs
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/48 |
0.003%
(80 kHz BW)
0.004% (80 kHz BW)
0.006% (80 kHz BW)
0.006% (AES17 filter)
0.004% (AES17 filter) |
IMD
(CCIF @ 15 kHz & 16 kHz)
6-Ch S/E Direct Input
2-Ch BAL Direct Input
2-Ch S/E Direct Input
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/96 |
0.001%
0.002%
0.003%
0.003%
0.001% |
S/N
Ratio (ref. 2.0 Vrms A-weighted)
6-Ch S/E Direct Input
2-Ch Direct Inputs
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/96 |
107
dB
106 dB
100 dB
104 dB |
| XLR
Pin Configuration |
Pin
1: Ground, Pin 2: Positive, Pin 3: Negative |
|
|
| |
| ZONE
2 and ZONE 3 PATHS |
Frequency
Response and Bandwidth
THD+N (at Rated Input & Output)
IMD (CCIF at 15 kHz & 16 kHz)
S/N Ratio (ref. 2.0 Vrms A-weighted) |
20
Hz to 20 kHz +0, -0.1 dB; 3 Hz to 140 kHz -3 dB
0.06% (80 kHz BW)
0.06%
97 dB |
RECORD
PATH Analog to Digital Conversion S/N Ratio
(A-weighted) |
100
dB |
|
|
| |
| FM
TUNER SECTION |
Sensitivity
50 dB S/N
IHF |
13
dBµ typ., 25 dBµ max.
10 dBµ typ., 20 dBµ max. |
S/N
Ratio
Mono
Stereo |
75
dB typ., 65 dB min.
69 dB typ., 60 dB min. |
Distortion
Mono
Stereo |
0.2%
typ., 1.0% max.
0.3% typ., 1.5% max. |
| Stereo
Separation |
40
dB typ., 25 dB min. |
Adjacent
Channel Selectivity
(+/- 400 kHz) |
70
dB typ., 60 dB min. |
| Frequency
Response |
25
Hz to 15 kHz +0. -2 dB |
|
|
| |
| AM
TUNER SECTION |
| Sensitivity
(20 dB S/N) |
49
dBµ typ., 56 dBµ max. |
| S/N
Ratio |
50
dB typ., 43 dB min. |
| Distortion |
0.7%
typ., 2.0% max. |
| One-Signal
Selectivity (+/- 10 kHz) |
24
dB typ., 18 dB min. |
|
|
| |
| VIDEO
SECTION |
Bandwidth
Composite & S-Video
Component: Green
Component: Red
Component: Blue |
6
MHz -0.02 dB; 70 MHz -3 dB
110 MHz -3 dB
90 MHz -3 dB
80 MHz -3 dB |
All video inputs and outputs are 75 ohms, 1.5 Vp-p. Component
inputs and outputs work with any Standard requiring ultra-wide
bandwidth (1080 p compatible), including Component-RGB, HDTV,
line doublers, quadruplers, and scalers.
|
|
|
| |
| HDMI™ – AVM
40 & AVM 50 ONLY |
Four
HDMI™ inputs
for digital video, digital audio, and multichannel high-resolution
audio.
|
|
|
| |
DIGITAL
AUDIO
All digital audio inputs and outputs are to S/PDIF electrical
(75 ohm, 0.5 Vp-p), S/PDIF optical (Toslink), or AES / EBU (110
ohms, 5 Vp-p) standards as appropriate. |
| Processor |
FreeScale™ DSP
56367 150 MHz |
Audio
Converters
Analog to Digital
Digital to Analog |
AKM® AK5383
up to 24-bit/96 kHz
AKM® AK4382 up to 24-bit/192 kHz |
|
|
| |
| CONTROL |
Infra
Red
Carrier Frequency
Max. 12V Supply Current
Max. Emitter Current |
38
kHz
150 mA
100 mA per output |
| RS-232
Connection |
DB-9F
(straight-wired) |
| RS-232
Pin Configuration (AVM 30 Side) |
Pin
2: Tx, Pin 3: Rx, Pin 5: Ground |
| RS-232
Port Configuration |
Baud
rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200), 8
data bits, 1 stop bit, no parity bits, flow control (RTS, CTS,
NONE) |
Trigger
Outputs
Polarity
Max. Current @ 12 VDC
Sequential Delay |
tip
positive; sleeve negative
50 mA (Triggers 1,2), 200 mA (Trigger 3)
250 ms |
|
|
| |
| DIMENSIONS |
Width |
17-1/4
inches (43.8 cm) |
Height |
5-7/8
inches (14.9 cm) including feet; Rack-mounting: 3 rack units,
without feet |
Depth |
14-1/4
inches (36.2 cm) |
Weight |
|
|
|
| |
| MISCELLANEOUS |
| Supply
Voltage |
105-130
V, 60 Hz only |
| Power
Consumption |
Maximum
140 VA |
|
|
| |
 Return
to Anthem Products  Return
to Top
|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|